|
Application:
Flexichem Mobil has been specially developed for use in tankers used to transport chemicals.
Suitable for the transport of acids, alkalis, salts, organic compounds (alcohols, esters, ketones, etc.) incl. aromatic substances, chlorinated hydrocarbons and oxidising acids (see our chemical resistance
list).
Feature:
The UPE tube has an extremely low friction coefficient and good abrasion resistance.
Very robust but also extremely flexible, due to special spiral design.
Standard/approval:
EN 12115:1999, TRbF 131/2:1992.
Notice:
Further development of the UPEL Mobil hose. Due to the elongation of the special spiral design, we recommend a maximum pressure of 6 bar, as is normal for filling operations.
ATTENTION: The temperature of the medium must be lower than its boiling point.
ATTENTION: Please refer to the Semperit resistance list or, in case of doubt, contact Semperit.
ATTENTION: Continuous use at the peak values reduces the service life.
ATTENTION: To ensure the assembly is leakproof, it must be tested according to EN 12115:1999.
|
|
Temperature range: Tube, depending on the discharge medium up to +100°C, hose, flexible down to -35°C. Steam cleaning, without pressure, up to 130°C / max. 30 min.
Safety factor: 4 : 1
Tube: UPE, black, smooth, electrically conductive.
Reinforcement: Textile wrapped, 2 crossed copper wires, zinc plated steel wire helix.
Cover: EPDM, black, corrugated, electrically conductive, abrasion resistant, weather resistant, cloth impression.
Marking: Continuous transfer tape, blue/white:
"SEMPERIT S Chemie FLEXICHEM Mobil PN 10 bar", and continuous embossed labelling: "SEMPERIT S EN 12115 FLEXICHEM SD (DN) PN 10 bar Ω quarter/year TRbF 131/2". |
